Specialized in the sale of robotic products! educational robots, toy robots, connected objects
- Home >
- Electro >
- Raspberry Pi > Inventor Kit for Raspberry Pi Pico Kitronik
Inventor Kit for Raspberry Pi Pico Kitronik
The Kitronik Inventor's Kit for Raspberry Pi Pico is a comprehensive starter kit for electronics and MicroPython programming, designed to teach you by building real circuits. It allows you to gradually understand how sensors, motors and components interact with the Pico board.
10 guided experiments, robust prototyping system, over 60 components included, detailed step-by-step colour booklet, no soldering required.
Kitronik Inventor’s Kit for Raspberry Pi Pico Single Pack
The Kitronik Inventor’s Kit for Raspberry Pi Pico is a comprehensive starter kit for electronics and MicroPython programming, designed to teach you by building real circuits. It allows you to gradually understand how sensors, motors and components interact with the Pico board.
10 guided experiments, robust prototyping system, over 60 components included, detailed step-by-step colour booklet, no soldering required.
- Educational kit for Raspberry Pi Pico
- Learn electronics and MicroPython
- 10 progressive experiments from beginner to advanced level
- No soldering required
- Detailed colour booklet with diagrams and explanations
- Robust and reusable Inventor's prototyping system
- Simple mechanical assembly on moulded plate
- Over 60 components and connectors included
Kitronik Inventor's Kit Pico Technical Specifications
- Raspberry Pi Pico compatible
- 10 guided electronics experiments
- Colour instruction booklet included
- Injection-moulded prototyping board
- Laser-cut Pico mounting plate
- Pico Pin Breakout Board included
- 1 SG90 180-degree servo
- 1 motor with fan propeller
- 1 7-segment display
- 1 ZIP LED stick with 5 LEDs
- 8 5 mm red, green, yellow and orange LEDs
- 4 push buttons
- 1 3 mm phototransistor
- 1 BC337 NPN transistor
- 10 220 Ω resistors
- 5 2.2 kΩ resistors
- 5 10 kΩ resistors
- 1 470 µF electrolytic capacitor
- 1 piezo buzzer
- 1 potentiometer with knob
- 20 male-to-male jumper cables
- 1 terminal connector
Required items not included
- 1 Raspberry Pi Pico with soldered pins
- 1 micro USB cable
- Phillips screwdriver
- Screwdriver for terminal block
- Thonny editor for Python programming
- 1 x Full-colour instruction booklet.
- 1 x Kitronik injection moulded Inventor’s prototyping mounting plate.
- 1 x Laser cut Pico mounting plate and fixings.
- 1 x Pico Pin Breakout Board.
- 1 x Kitronik 5 LED ZIP stick with pins.
- 1 x Mini 180 Degree Resin Gear Servo SG90.
- 1 x 7 segment display.
- 4 x Push switch.
- 2 x Red 5mm LED.
- 2 x Green 5mm LED.
- 2 x Yellow 5mm LED.
- 2 x Orange 5mm LED.
- 10 x 220Ω resistor.
- 5 x 2.2kΩ resistor.
- 5 x 10kΩ resistor.
- 1 x 3mm Phototransistor.
- 1 x Transistor (NPN BC337).
- 1 x Fan blade.
- 1 x Motor.
- 1 x Piezo element buzzer.
- 20 x MM jumper wires.
- 1 x 470uF electrolytic capacitor.
- 1 x Terminal connector.
- 1 x Potentiometer & finger adjust spindle.
