Starlink 12V/24V Nomad Cable

Starlink 12V/24V Kevlar Cable, 15 m – Power supply for Starlink Mini from a vehicle socket

This 15 m power cable is designed to power the Starlink Mini from a cigarette lighter socket or any 12V or 24V vehicle socket, without the need for tools or electrical installation. It delivers an output of 30V/2A (60W) via an aluminium adapter with built-in regulation, which keeps the Starlink Mini running smoothly even in demanding outdoor conditions.

The outer sheath consists of a double-layer braid of Kevlar 29 (K29) aramid fibre and nylon to withstand severe wear and tear. The cable terminates on the Starlink side with a weather-resistant vulcanised LSR silicone seal. An integrated silicone clip allows it to be neatly stowed away when folded. It is FCC, CE and UKCA certified.

15 m Kevlar cable for Starlink Mini, 30V/2A (60W) output, compatible with 12V and 24V vehicle sockets, aluminium adapter, weather-resistant silicone seal and storage clip included.

What this Kevlar cable offers for powering the Starlink Mini on the move

• 15 m reach to position the Starlink Mini antenna where the signal is optimal
• Compatible with any 12V or 24V socket in a vehicle, motorhome, boat or generator
• Regulated 30V/2A (60W) output with temperature control for uninterrupted operation
• Double-braided Kevlar 29 (K29) and nylon sheathing to withstand wear and tear in outdoor conditions
• Aluminium adapter for a secure connection and a neat finish on the dashboard
• Vulcanised LSR silicone seal on the antenna side for a weather-resistant connection
• Integrated silicone tie for cable management
• FCC, CE and UKCA certified

Whether in a van or motorhome, plug the adapter into the 12V or 24V socket on the dashboard and connect the other end to the Starlink Mini. The 15 m cable allows you to place the antenna on the roof or outside the vehicle without any distance restrictions. The built-in temperature control prevents power cuts caused by load fluctuations whilst driving or during long stops.

Box contents: Starlink 12V/24V Kevlar cable

• 1 x 15 m Kevlar power cable for Starlink Mini
• 1 x 12V/24V aluminium adapter
• 1 silicone cable tie

What else you’ll need

• Starlink Mini (not included)
• Vehicle with available 12V or 24V socket

Technical specifications of the Starlink 12V/24V Kevlar cable

• Compatibility: Starlink Mini
• Length: 15 m (50 ft)
• Compatible power supply: 12V or 24V vehicle socket
• Output: 30V/2A (60W)
• Outer sheath: Kevlar 29 (K29) aramid fibre and nylon, double-braided
• Conductor: copper
• Adapter: aluminium
• Antenna-side seal: vulcanised LSR silicone
• Storage clip: silicone
• Certifications: FCC, CE, UKCA

Frequently asked questions about the Starlink 12V/24V Kevlar cable

Does it work with 24V sockets in lorries and motorhomes?
Yes. The cable is compatible with any 12V or 24V vehicle socket, including those in lorries and large motorhomes.

Is there a risk of draining the vehicle’s battery?
The adapter features a built-in regulator that optimises conversion efficiency to minimise drain on the vehicle’s battery.

Is the cable suitable for prolonged outdoor use?
Yes. The Kevlar 29 and double-braided nylon sheath is designed to withstand abrasion and wear. The LSR silicone seal on the antenna end is vulcanised to withstand the elements.

Is this cable compatible with Starlink antennas other than the Mini?
No. This cable is designed and certified for the Starlink Mini only.