Inventor Kit For VinciBot MatataStudio

MatataStudio Inventor Kit for VinciBot: 5 programmable electronic modules and a Link Module

The MatataStudio Inventor Kit is an electronic extension for the VinciBot robot that adds five programmable modules: a 360° digital servo, a temperature and humidity sensor (DHT11), a joystick, an LED strip and a rotary angle sensor. A Link Module allows you to connect third-party sensors compatible with Arduino and Micro:bit to further expand the kit’s capabilities. The five modules are programmed via the dedicated section of the VinciBot graphical platform. The kit includes 128 building blocks, a manual with seven step-by-step case studies, a USB-C cable and craft paper to enhance your projects.

VinciBot Inventor Kit, 360° servo, temperature sensor, joystick, LED strip and Arduino- and Micro:bit-compatible Link Module, 7 case studies included.

How the Inventor Kit enhances the VinciBot for exploring electronics and programming

• 360° digital servo for animating mechanisms with programmable continuous rotation
• DHT11 temperature and humidity sensor for environmental measurement projects
• Joystick for controlling the robot or interactive game elements
• Programmable LED strip for customising the lighting of constructions
• Rotary angle sensor for position detection projects
• Link Unit module to connect third-party Arduino and Micro:bit sensors and expand possibilities
• Graphical programming dedicated to the 5 modules via the VinciBot platform
• 128 building blocks to integrate the modules into physical structures
• Construction manual with 7 step-by-step case studies to guide beginners

Children follow the 7 case studies to assemble their first electronics project step by step, connecting the temperature sensor and programming an LED strip that changes colour according to the measured value. Using the Link Unit module, they then connect an Arduino sensor of their choice and integrate it into their VinciBot programme to create a personalised project that goes beyond the guided case studies.

Contents of the MatataStudio Inventor Kit

• 1 rotary angle sensor
• 1 temperature and humidity sensor (DHT11)
• 1 x 360° digital servo
• 1 x joystick
• 1 x LED strip
• 1 x Link Unit module for VinciBot
• 128 x building bricks
• 1 USB-C cable
• 1 paper craft kit
• 1 user guide
• 1 construction manual with 7 case studies

Additional items required

• MatataStudio VinciBot robot (sold separately, required to use this extension)

Technical specifications of the MatataStudio Inventor Kit

• Compatibility: MatataStudio VinciBot robot
• Electronic modules: 360° servo, DHT11 sensor, joystick, LED strip, rotary angle sensor
• Link Unit module: compatible with Arduino and Micro:bit sensors
• Programming: dedicated section on the VinciBot graphical platform
• Building blocks: 128
• Case studies: 7
• Recommended age: 8 years and over
• Brand: MatataStudio