Specialized in the sale of robotic products! educational robots, toy robots, connected objects
- Home >
- Educational Robots >
- Makeblock > Mcore mBot Makeblock Card
Mcore mBot Makeblock Card
This programmable board has been created specifically for the realization of programmable robots. It is composed of an Arduino UNO-328 compatible microcontroller (ATmega328 base) and a motor driver that can directly drive two "dc" motors (6 to 12 V / 1 A max.). This is the board used for the Makeblock "mBot" robots.
The board has a quick connection system via 4 RJ25 plugs. These 4 sockets allow a multitude of extension modules to be connected instantly (and without soldering) using dedicated cables.
Mcore mBot Makeblock programming board
This programmable board is specially designed for the development of playful robots. It is composed of an arduino UNO-328 compatible microprocessor (ATmega328 base) associated to a motor driver which will be directly able to drive 2 "dc" motors (6 to 12 V / 1 A max.). This is the board used in the "mBot" robots.
The board has a USB socket to program it via the arduino environment. It also has:
- A buzzer.
- 2 RGB Leds.
- An IR transmission LED.
- An IR reception LED.
- A light sensor.
- A push button.
- 2 connectors to link 2 motors.
- An "On/Off" switch.
- A connector to connect it to a battery holder (holder not supplied).
- A connector to connect it to a LiPo 3,7V battery (battery not delivered).
- 4 RJ45 connectors to connect extension modules.
The board benefits from a quick connection system via 4 RJ25 sockets. These 4 sockets allow to connect instantly (and without soldering operation) a multitude of extension modules using dedicated cables.
Compatible with the mBlock software.
Mcore mBot Makeblock board with USB socket to program it via the arduino environment.
It also has:
- A buzzer.
- 2 RGB Leds.
- An IR transmission LED.
- An IR reception LED.
- A light sensor.
- A push button.
- 2 connectors to link 2 motors.
- An "On/Off" switch.
- A connector to connect it to a battery holder (holder not supplied).
- A connector to connect it to a LiPo 3,7V battery (battery not delivered).
- 4 RJ45 connectors to connect extension modules.
MBot 2 Makeblock Educational Robot
