The PNJ R-Racer drone is a racing drone that can go up to 100 km/h, delivered ready to take off but also scalable. This drone has the particularity to be completely dismantled and customized for model making enthusiasts. Its frame is made of fiberglass, which ensures optimal lightness and speed for your flight experiences or drones races. The PNJ R-Racer is equipped with a 720p camera.
720p camera, remote control, maximum speed of 100 km/h, brushless motors, fiberglass frame, real time FPV, Li-Po 1500 mAh 11.1V battery.
The R-Racer drone is delivered assembled and ready to fly to enjoy your first flight quickly: All you have to do is screw the propellers into the right places and plug in your battery to start flying your drone. But it can also be customized to improve its performance, you can indeed completely dismantle it and tinker with it. The R-Racer has a video transmitter for first person flight transmission (FPV).
The Racer is equipped with a 720p HD camera mounted on a stand equipped with an anti-vibration system and a 5.8GHz video transmitter. Thanks to its brushless motors, your drone can reach 100km/h and the immersion view allows you to get a live image feedback on screen or even in your virtual reality headset (not provided in this pack). This way you will have the sensation of having the images filmed by the HD camera placed in the nose of your drone in front of your eyes. Sensations guaranteed!
the joystick is equipped with 2 joysticks, the one on the right corresponds to the directional control and the one on the left allows you to adjust the gases. This last command therefore allows you to take off/up and land/re-enter. In the field of race drones, flight path accuracy is the key to saving precious seconds. Calibration of the remote control is therefore essential and must be checked regularly. This is easy to do from the Racer's remote control with 3 controls for altitude correction, pivoting or lateral movement.
The R Racer drone needs power to power its 4 brushless motors. It is therefore equipped with a 3-cell 1500mAH Li-Po battery allowing it to achieve a flight time of 10 minutes. Once discharged, you can easily replace your battery. Simply disconnect the battery in place and loosen the strap to hold it securely in place during the flight. Then place the new battery in place of the old one, make sure the strap is tightened properly and the battery does not move and replace the connector. The operation only takes a few seconds.
This drone has been designed using materials selected for their robustness. These fibreglass composite chassis elements are completed with strong but also flexible plastic propellers to limit the risk of breakage and hard plastic protection elements for LED cards and electronic elements.
Warnings: