NodOn Temperature And Humidity Sensor

The right temperature and humidity

NodOn's EnOcean temperature and humidity sensor will send a signal to your home automation system or supervision system each time a variation of 0.5°C or +/-2% humidity is detected. Room temperature and humidity information is recorded every 100 seconds and a "life signal" is sent every 15 to 30 minutes to indicate the room temperature and humidity.

• Easy installation with adhesive strips or screws
• Operates without batteries
• The cheapest high-performance sensor on the market
• Wireless sensor

With the EnOcean humidity and temperature sensor, you can:

• Control the temperature & humidity in my room to ensure the comfort of the whole family
• Ensure that your heating system heats the room to the ideal temperature
• Make sure that the cellar or cellar is at the right temperature without excess humidity
• Control the humidity level in your home and ensure the well-being of your children
• Run scenarios based on temperature and/or humidity. Why turn on your heater if you can open the shutters and heat the room naturally?

Features of the NodOn temperature and humidity sensor

• Power supply: Solar panel
• Temperature measurement range: 0°C to 40°C (Resolution 0.16°C) - indoor
• Humidity measuring range: 0 to 100% RH - indoor
• Wall mounting: by double-sided adhesive (included) or screws (not included)
• Optional CR1216 battery (not included) for use in dark areas (3 years full black battery life)
• Operating temperature: 0°C to 40°C
• Radio Protocol: EnOcean® EEP: A5-04-01
• Frequency: by region
• Range: 30m inside
• Dimensions: 80*26*18mm

Certifications of the EnOcean NodOn humidity and temperature sensor

Europe

• IN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
• IN301489-3 V1.6.1
• IN 61000-3-2-2:2013,
• IN 61000-3-3-3:2013
• IN 300220-2 V3.1.1.1
• EN 62479:2010

USA

• FCC & IC Rules