Language : English

Specialized in the sale of robotic products! educational robots, toy robots, connected objects

You are here :
  1. Home
  2. >
  3. Educational Robots
  4. >
  5. Bare Conductive
  6. > Bare Conductive Touch Board Starter Kit

Bare Conductive Touch Board Starter Kit

Electronic kit with conductive ink
Bare Conductive

If you've ever thought of playing your favorite song on a poster, giving voice to objects or creating hidden sensors in your home, then the Bare Conductive Touch Board Starter Kit is for you. This ingenious kit by Bare Conductive is based on an electrically conductive ink that makes your imagination work.

Bare Conductive's electric paint is like any other water-based paint, except that it is electrically conductive! This means that you can paint sensors directly on most materials. When used with the Touch Board, an easy-to-use Arduino@Heart microcontroller, it allows you to turn almost any material or surface into a sensor.

> Read more
Order
Site Reference : RA_DFR016
Manufacturer Reference : TOY0065

+ -
Available More than 2 Available
Shipped within 48h
204,90 €

Bare Conductive Touch Board: Starter Kit

Each kit contains a Touch Board, electric paint and everything you need to start transforming the world around you. No programming knowledge is required! The Touch Board Starter Kit is ready to plug and play, allowing you to create any of the three projects presented at the start before going on to create your own.

The guide in the Bare Conductive Getting Started Kit will take you step-by-step and is packed with ideas, resources and inspiration to build on.

Bring your imagination to life! Check out the projects below and start making your world interactive.

 

 

Bare Conductive Starter Kit: features

Electric paint :

  • Painting, silkscreening, stencilling, spraying or application like any other water-based paint
  • Dries at room temperature in 10-15 minutes
  • Must be completely dry to operate
  • Easily disassembled with soap and water
  • Seal with acrylic paint or spray varnish
  • Can last for years if properly treated and stored dry.
  • Works on: paper, cardboard, wood, plastic, glass, plaster, some rubbers, textiles, etc.
  • Can be painted or sprayed for protection or multilayer circuits.
  • Can be used with conductive yarn and e-textiles
  • Surface resistance of about 55 ohms/square for a layer thickness of 50 microns

Touch Board :

  • Tactile and remote detection
  • Works very well with Electric Paint
  • Pre-programmed as an MP3 player
  • Easy to program as a MIDI instrument or MIDI interface
  • HID capable of transforming the Touch Board into a keyboard or mouse
  • Compatible with Arduino and programmable via Arduino IDE
  • Arrangement of Arduino Leonardo pins supporting the Arduino shields
  • Integrated LiPo battery charger
  • 3.5 mm (0.14") audio jack
  • 20 digital I/O pins
  • 12 Analog pins
  • Atmel ATMega32U4 microprocessor
  • Dedicated MPR121 free-scale touch interface
  • VLSI VS1053B Audio Processor
  • 32 kb of flash memory of which 4 kb are used for the bootloader
  • 2.5 kB of SRAM
  • 5V operating voltage

Bare Conductive Starter Kit: Projects

  • Bare Conductive Touch Board Starter Kit x1
Complementary products
BarePaint Conductive Paint Pens

BarePaint Conductive Paint Pens

Conductive Paint Pens 10ml by Bare conductiveive Paint Pens
15,90 €
Flashing Card Set Bare Conductive

Flashing Card Set Bare Conductive

Draw simple electrical circuits
34,90 €
BarePaint Conductive Paint 50ml

BarePaint Conductive Paint 50ml

Electrically conductive paint by Bare Conductive
34,90 €
The newsletter
Receive our great deals and news